With a tool so tough as Dewalt's DW718 12" double-bevel sliding compound miter saw, it is no mystery that the sucker is going to get a little kicked around. Of course, the regular abuses of jobsite life will wear on the tool and eventually it's going to require a bit of tinkering on your behalf. Don't fret though, said tinkering is generally simple with the right tools and a bit of patience.
It may surprise you to learn that the leading cause of inaccurate miter saw cuts is actually a misaligned or warped fence. As many awful things like kickback and sloppy cutting can result from a misaligned or otherwise off-kilter rip fence, your fence alignment and the fence alignment process are important parts of miter sawing and miter saw ownership; despite the seemingly elementary process of this procedure, it can make or break your cutting results. Additionally, because Dewalt's DW718 packs such a serious amount of punch, ensuring that your cuts are accurate and your materials are safe from error or kickback is all the more important. Be precise and be cautious.
Cable Porter
So, to get down to business, using a framing square or straight-edge that is at least as long as your fence, press a piece of ultra thin paper (i.e. tracing paper or telephone book paper) against the fence (or straight-edge). The fence and square should sandwich the paper. Now, tug softly at the top of the paper. It should be tightly stuck between the fence and the square at all points from one end of the fence to the other. If at any point you can remove the paper from said contraption, you have a bow, a sway, or an imperfection in the fence that needs to be corrected.
To adjust the DW718's one piece fence, loosen the screws closest to the imperfection and remembering to not over-correct use a pry bar to gently force that bent fence straight. Maintain pressure on the pry bar and tighten the screws. Recheck this space to be sure the bow has completely straightened. Repeat the process until the paper can not be removed from any point on the fence. Additionally, and as with almost all things in life, this procedure is generally easier with four hands; if someone can help you, gratefully accept their offer and hold and push and pull and test and measure until your fence is perfectly straight. Additionally, and I reiterate, please be careful as you correct your fence; move it only in very small increments to avoid over-correcting any imperfections.
If you discover you need an extra hand aligning the fence on your DW718 miter saw, simply take the saw to a factory authorized Dewalt service center for adjustment.
Special Price!!! Porter-Cable 557 7 Amp Plate Joiner Kit
Oct 22, 2011 20:46:50
Click for larger image and other views
Porter-Cable 557 7 Amp Plate Joiner Kit Feature
- Plate joiner kit handles a variety of wood and offers seven different cutting settings. Seven-position rotating depth stop for FF, #0, #10, #20, Simplex, Duplex, and Max (#6) biscuits
- Industry-leading, super powerful 7 Amp motor rotates blade at 10,000 RPM. Fence tilts from 0 degrees to 135 degrees with positive adjustable stop at 90 degrees
- Four-inch blade makes standard-size cuts; two-inch blade easily handles cuts as fine as 1-1/2 inches
- Measures seven inches in height and weighs 7.5 pounds
- Comes with two blades, centering plate, spanner wrench, dust bag, and chip deflector
Porter-Cable 557 7 Amp Plate Joiner Kit Overview
Offering seven cutting settings to handle a variety of wood types, the Porter-Cable 557 Deluxe Plate Joiner Kit boasts an industry-leading motor for powerful, dependable performance. Whether you're a professional cabinetmaker or woodworker, you'll appreciate the 557's versatile fence and efficient design.
|
 This plate joiner handles a wide range of joining applications and features a 7 amp motor with a rotating blade. View larger. |
The 557 owes its robust performance to a powerful 7 amp, 120-volt motor that rotates the blade at 10,000 rpm. The fence tilts from 0 to 135 degrees for east placement of both inside and outside corner registrations. A positive adjustable stop at 90 degrees and a micro-height adjustment knob ensure proper biscuit positioning for precision and versatility. For optimum control and stability during cuts, the bale handle is attached to the fence rather than the motor.
Advanced Fence System for Precision and Accuracy
Complete with a lock-on trigger, the 557 boasts an innovative fence system with a pivot point that provides accurate height readings, as well as a fencing plate for stabilization, centering, and spacing. A keyhole-slotted blade cover and spindle lock make for quick and easy blade removal and changing, while seven cutting settings tackle a range of biscuit sizes and fastening accessories.
Two Blade Sizes for Standard and Face-Frame Biscuits
The 557 offers a technologically advanced system accepting two blades both standard and face frame biscuits. The 4-inch blade is for standard-size cuts, while the 2-inch blade easily handles cuts as small as 1-1/2 inches.
Additionally, a seven-position rotating depth stop works for standard #0, #10, #20 as well as Simplex, Duplex, and Max (#6) joinery.
Compact for Portability and Comfortable Handling
For easy portability, handling, and storage, the 557 has a height of 7 inches and weighs just 7-1/2 pounds.
What's in the Box
Plate Joiner, #5559 2-Inch Blade, #5558 4-Inch Blade, #888776 Centering Plate, #883175 Dust Gag, #886490 Chip Deflector, #891869 Allen Wrench, carrying case, and operating manual.
 Bale handle is attached to the fence for control during detailed cuts. |
SAVE NOW on the special offers below!
Available In Stock. |
| This Porter-Cable 557 7 Amp Plate Joiner Kit ships for FREE with Super Saver Shipping. |
Price : Click to Check Update Prices Please. |
